Two-post hydraulic press for fast molding, suitable for the cold deformation of sheet metal with an approach speed of the hydraulic cylinder up to 125 mm/sec.

The MST hydraulic press is equipped with a mobile upper platen, which slides along 4 guides and a fixed lower platen, which is bolted to the monolithic structure of the press. Both tables are equipped with T-slots which allow a quick and easy fixing of the moulds. The stroke of the hydraulic cylinder is 500mm, while the gap between the two work surfaces is 600mm.

The MST electro-hydraulic press is equipped with a Rexroth hydraulic power unit with monitored solenoid valves.

Other standard equipment is as follows:

– Siemens CPU for quota setting Cylinder adjustment with limit switches – Automatic movement controls using double buttons – Air/oil heat exchanger – Pressure switch – Rear protective metal mesh. – CE Certificate of Conformity – “Annex IV”

Listed below are the optional accessories of the two-post hydraulic press for fast moulding, model MST:

– Front photoelectric barriers – Digital control with Siemens display – Hydraulic cushion from 20 to 80 tons – Digital control of the blank holder cushion – Timer – Piece counter – Prismatic guides – Proportional valve for speed control – Proportional valve for pressure control – Separate management of approach speed and working speed – Variable displacement piston pump – Air/oil exchanger with independent recirculation