English
简体中文
Čeština
Dansk
Nederlands
Suomi
Français
Deutsch
Magyar
Italiano
日本語
Norsk bokmål
Polski
Português
Română
Русский
Español
Svenska
Hydraulic press with monolithic structure specific for the replacement of solid tires.This type of tire is used on a wide range of machinery, such as forklifts, tractors, excavators, pressure washers, sweepers, forestry and construction machinery or for workshop equipment.
The PFC hydraulic press can be produced in various tonnages, based on the diameter of the solid tire to be replaced:
The worktop has a height from the ground of 610mm and the distance between the tops is 1000mm.A flange is installed on the cylinder rod to be able to fix the molds for changing solid tires.
The workshop press is operated by simultaneously using the lever and the button.
At the request of one of our customers, we have created this two-column electro-hydraulic press for the assembly of high-tech components.
Normally, classic workshop hydraulic presses are not suitable for absolutely precise work and therefore, to meet our customer's requests, we have built a machine with a completely milled frame.
Furthermore, the mobile platform has been equipped with two handles that have the function of eliminating any oscillation and allowing perfect alignment with the piston.The moving table also features fully welded metal supports to allow work plates to be positioned on top of them, and M16 holes have been made for fixing the tools.
This customized workshop hydraulic press develops a power of 100 tons and has a distance between columns of 1100 mm.
The cylinder stroke is 500mm and has a 4 kW power unit. The working speed is 4 mm/sec, while the cylinder descent speed is 9 mm/sec and this allows the press to be operated with a single lever.
The piston is movable and can be moved transversely through the use of a convenient handwheel. In this way it is possible to apply the necessary pressure on the piece without having to move the material.
These are two 40-ton presses that will be used in aerospace plant workshops for the production of airplanes.
The machines are equipped with protective grilles on all 4 sides to guarantee total working safety for operators.The grille at the front of the hydraulic press can be opened and is equipped with microswitches, which immediately block the press if the grille is opened during machine operation.
The presses have a lower table of 850x900mm with 10 T-slots with a center distance of 50mm for fixing the molds.The table is height adjustable and its lifting occurs via a chain to be connected to the main cylinder.The hydraulic motor has a power of 4 kW with a cylinder approach speed of 25 mm/sec and a working speed of 4 mm/sec.
Hydraulic press designed for the deformation of large diameter metal pipes.
This mechanical workshop press is equipped with a hydraulic cylinder with a stroke of 500mm and develops a power of 500 tons.
The metal tube to be crushed is placed on a 1200x1200mm work surface.
The hydraulic press is equipped with front protection nets equipped with safety sensors, which immediately interrupt the pressing activity of the machine if they detect the opening of the nets during the press processing phases.
Hydraulic workshop press designed for assembling valves and tightening large screws.
This hydraulic press features electromechanically interlocked gates connected to the machine's software. Only in particular safety and pressing conditions can the operator open the doors and carry out tightening work on the partially pressurized piece.
The PST 150 electro-hydraulic press is equipped with personalized digital control for managing the production cycle and you have the possibility of modifying the parameters according to your needs.The hydraulic control unit was positioned in the upper part of the press structure to optimize the spaces inside the mechanical workshop.
Hydraulic press for mechanical workshops made for a box factory to press cardboard packaging. The customer's need was in fact to compress and compact the newly produced cardboard and to reduce its bulkiness for warehouse and transport needs.The hydraulic press is equipped with two milled work surfaces measuring 600x600mm with a maximum vertical distance of 1000mm.
The lower work platform is height-adjustable and can be moved by connecting it to the main cylinder using special chains.
The mechanical workshop press is operated through the simultaneous use of double buttons and is equipped with hydraulic cylinder stop sensors that regulate its stroke.